Turtleback Form
Up

 

Date Start Finish Hours Work
8/4/2010 7:08 PM 7:57 PM 0.8 Finished installing the lath pieces, ground off some screws & micro drops then vacuumed the whole jig / cleaned up
8/4/2010 5:45 PM 6:32 PM 0.8 Continued assembling the turtleback jig; added the lath strips and frame pieces
8/3/2010 7:25 PM 8:44 PM 1.3 Marked the jig square then started assembling w/screws and washers.
8/3/2010 5:30 PM 6:00 PM 0.5 Dry assembled the turtleback jig that I borrowed from Ron Treml; originally built by Bob Forster
7/25/2010 5:55 PM 6:45 PM 0.8 Measured and test fit the canopy. Recognized I'd need to re-draw jigs 1-5 for the Texas Cozy canopy.

Chapter 18 Step 2     Chapter 16 Step 6

 

Up

Copyright © 2001-2011 Jim Springer - All Rights Reserved