|
11/27/2010 |
12:06 PM |
5:23 PM |
5.3 |
Microed the turtleback then did the 2 ply UNI layup on the outside. Peel plied the layup then cleaned up. |
|
11/27/2010 |
9:00 AM |
11:28 AM |
2.5 |
Made the aluminum insert for the turtleback. Cut glass, filled the epoxy pump and laid plastic for the next layup. |
|
11/24/2010 |
3:15 PM |
5:11 PM |
1.9 |
Sanded the depressions into the foam on the turtleback as prep for the outside layup |
|
11/9/2010 |
6:55 PM |
8:09 PM |
1.2 |
Made a yardstick-based sanding board and sanded the outside of the turtleback smooth. |
|
11/9/2010 |
5:55 PM |
6:15 PM |
0.3 |
Marked window locations on the foam in pencil. |
